Build Your Own

Taxi Driver (Delay) FV1 Modulation Build your own FV1 Delay pedal kit

Taxi Driver (Delay) FV1 Modulation Build your own FV1 Delay pedal kit
Taxi Driver (Delay) FV1 Modulation Build your own FV1 Delay pedal kit
Taxi Driver (Delay) FV1 Modulation Build your own FV1 Delay pedal kit

Taxi Driver (Delay) FV1 Modulation Build your own FV1 Delay pedal kit

The Taxi Driver is a FV-1 based modulation kit. It comes in two flavours, Delay and Reverb. This is the listing for the Delay option. You cannot do both at once unless you swap the Eeprom chip.

Its a really lovely digital delay with three controls which set the Delay parameters, simply named CTRL1, 2, 3. This approach allows the user to name them as they wish although on this one they control Time, Width & Feedbac k. There is also a two way toggle and a mix pot. Therefore the Taxi Driver is a very versatile, impressive DIY project. The two different delays available are really trippy and lush. I got lost in mine for hours. There are also two different difficulty levels, if you have experience soldering surface mount parts then this kit is fairly straight forwards. If you dont then the FV1 chip is a challenge. The FV1 is a very expensive part itself, so you do not want to practice on it.

You can add pre-soldering of the FV1 to your kit here, only available when shown as in stock though! Soldered, tested and certified by our resident JP expert. The FV1 and EEPROM work together, the EEPROM contains the individual programmes that the FV1 reads. So both are required to enable this project to work.

Therefore the minimum option to choose is the PCB, EEPROM and FV1 option, should you not have any. When complete, the project is everything you could wish for in a top quality delay pedal. Its feature packed, versatile and enhances whatever you feed into it and adds various different tonal flavours to your mix and I believe it will be an excellent choice for musicians of all types including synthers! The board is spaced for PCB mounted toggles and pots.

It fits in one of our JP125B cases. Whats Included with Each Option. PCB Only - Just the plain PCB. PCB & Components - PCB, onboard components and any pots and toggle switches. PCB & Components and off board parts - As above with off board components (foot switch, Jacks, 9v socket, LED).

Full Kit - As above with undrilled enclosure. Full Kit & Drilling - Full kit with drilled enclosure.

This item is in the category "Musical Instruments & DJ Equipment\Guitars & Basses\Parts & Accessories\Effects Pedals\Delay, Echo & Reverb". The seller is "jeds_peds" and is located in this country: GB. This item can be shipped worldwide.

  • Options: Pre Built
  • Brand: Undisclosed
  • Type: Delay


Taxi Driver (Delay) FV1 Modulation Build your own FV1 Delay pedal kit