Build Your Own

Irish Harp (FV1) Build your own pedal kit compares to Arpanoid

Irish Harp (FV1) Build your own pedal kit compares to Arpanoid
Irish Harp (FV1) Build your own pedal kit compares to Arpanoid
Irish Harp (FV1) Build your own pedal kit compares to Arpanoid

Irish Harp (FV1) Build your own pedal kit compares to Arpanoid

Welcome to Jeds Peds - We sell the best build your own effects kits in Morton, and maybe the world. The Irish Harp is a FV-1 based modulation kit. It takes whatever signal you feed into it and turns it into ascending or descending arpeggios. There are 4 pots and an 8 position rotary switch giving you a multitude of different options. Therefore this is a very versatile, impressive DIY project if arpeggios are your thing.

It can be in your face or subtle by using the 2 mix pots to blend it in with your clean signal. If there is one thing for sure its that this is going to be a firm favourite with the noise makers amongst us. There are two different difficulty levels, if you have experience soldering surface mount parts then this kit is fairly straight forwards. If you dont then the FV1 chip is a challenge. The FV1 is a very expensive part itself, so you do not want to practice on it.

Other than soldering the FV1 this kit is a through hole project, and it really isnt very difficult. The FV1 and EEPROM work togethe r, the EEPROM contains the individual programmes that the FV1 reads.

So both are required to enable this project to work. Therefore the minimum option to choose is the PCB, EEPROM and FV1 option, should you not have any. When complete, the project is everything you could wish for in a top quality pedal. The board is spaced for PCB mounted toggles and pots.

It fits in one of our JP125B cases and comes with top mounted jacks and power. Whats Included with Each Option. PCB, onboard components and any pots and toggle switches. PCB & Components and off board parts.

As above with off board components (foot switch, Jacks, 9v socket, LED). As above with undrilled enclosure. Full kit with drilled enclosure.

Please be sure to read the build document before you order. The kits are enjoyable but can also be challenging. You will have to identify components, calculate resistor codes and be able to solder them into place. All kits require full assembly and any images of completed PCBs are for reference only. This item is in the category "Musical Instruments & DJ Equipment\Guitars & Basses\Parts & Accessories\Effects Pedals\Other Guitar Effects Pedals".

The seller is "jeds_peds" and is located in this country: GB. This item can be shipped worldwide.
  • Options: PCB & components & off board parts
  • Brand: jeds peds
  • Type: arpeggiator

Irish Harp (FV1) Build your own pedal kit compares to Arpanoid